How does it work?
When the unit goes on, the inlet valve opens and cylinder fills of water. Water enters the bottom of the boiler and rises until it reaches the high level electrode. The electric current by applying power to electrodes immersed in water, heats the water to produce steam in response to the humidistat's input signal. The quantity of steam produced is proportional to the electric current, which is proportional to the level of water. Due to evaporation, the water level decreases and gets more conductive meaning that the water has to be replaced. 

Features
 Steam production is pure, sterile and free of minerals
 No risk of contamination by bacteria with anti freeze option
 Steam output from 5 to 90 Kg/Hrs
 Can be used with tap, soft, RO and DI water
 Alpha digital control panel in standard
 Drived by microprocessor with ON/OFF or proportional control
 Disposable or cleanable cylinder
 Plain stainless steel electrodes
 Recyclable plastic cylinders
 PC board up to ROHS standard 
 Front display panel message in case of failure or if cylinder needs to be changed
 Easy installation and maintenance
 Accept all common signals

How does it work?
When the unit goes on, the inlet valve opens and cylinder fills of water. Water enters the bottom of the boiler and rises until it reaches the high level electrode. The electric current by applying power to electrodes immersed in water, heats the water to produce steam in response to the humidistat's input signal. The quantity of steam produced is proportional to the electric current, which is proportional to the level of water. Due to evaporation, the water level decreases and gets more conductive meaning that the water has to be replaced.

Features
 Steam production is pure, sterile and free of minerals
 No risk of contamination by bacteria with anti freeze option
 Steam output from 1 to 4 Kg/Hrs
 Can be used with tap, soft, RO and DI water
 Drived by microprocessor with ON/OFF or proportional control
 Disposable or cleanable cylinder
 Plain stainless steel electrodes
 Recyclable plastic cylinders
 PC board up to ROHS standard
 Easy installation and maintenance

How does it work?
When the unit goes on, the inlet valve opens and cylinder fills of water. Water enters the bottom of the boiler and rises until it reaches the high level electrode. The electric current by applying power to electrodes immersed in water, heats the water to produce steam in response to the humidistat's input signal. The quantity of steam produced is proportional to the electric current, which is proportional to the level of water. Due to evaporation, the water level decreases and gets more conductive meaning that the water has to be replaced. Components can be in that case directly wired.

How does it work?
When power is supplied to the unit, the water fill valve opens and it enters the tank until the high-water switch is reached. The humidifier then produces steam in response to the humidistat's input signal. Steam output is continuously adjusted to satisfy necessary humidity requirements.

Features
 Steam production from 5 to 100 kg/h. Master slave up to 600 kg/h.
 Work with tap, soft, RO and DI water
 Alpha digital in standard with ON/OFF or proportional control in standard
 Accept all common modulating signals
 Self cleaning INCOLOY elements
 Permanent stainless tank
 Rocking tank with intermediary position allowing easy maintenance 
 Cooling cycle before maintenance avoiding loosing time
 Inlet valve with internal filter 
 Outlet valve with large orifice for easy scale elimination 
 Possibility to maintain temperature at 80°C 

How does it work?
When power is supplied to the unit, the water fill valve opens and it enters the tank. Once the level reaches the low-water switch, the heating elements are energized (assuming there's a call for steam output). The unit continues to fill until the high-water switch is reached. The humidifier then produces steam in response to the humidistat's input signal. Periodic tank drainage is based on active time of the heating elements, but may be field-adjusted to water conditions.

The HumidiClean power module accepts a proportional signal and, in response, pulses power to the heating elements to provide fully modulated output. Steam output is continuously adjusted to satisfy necessary humidity requirements.