Humidifying Solutions > UCAN > Ultrasonic Humidifiers > For Open Showcase
 
For Open Showcase
 
FT420S(SC), 520S(SC) Series
 
[PRODUCT OUTLINE]
An immersion-type UV lamp is mounted inside the water tank of a humidifier.
This model is installed on the top of 6'¡«8' wide showcase with its nozzles connected to the showcases duct to spray mist along with cold air. It functions to preserve the freshness of fruits and vegetables by keeping them from wilting and it also brings about the visual effect of their fresh appearance, thus appealing to the buyers.
"S" stands for the type that sprays mist at a constant level of intensity, while "SC" stands for the type that can be regulated steplessly with a remote controller.
We recommend to carry out the regular maintenance works by specialist. Humidity outputs are from 0.5 to 2.0 litre/hour for FT-420S(SC) and from 0.5 to 2.5 litre/hour for FT-520S(SC).
 

[FEATURES]
- It supplies ample mist extensively to every corner of the showcase and thus enhances the produce's freshness
- Equipped with a remote controller that steplessly regulates the mist's intensity (FT-420SC,FT-520SC)
- Has a bypass to keep the cold and humid air in the showcase from effecting the electrical component while the unit is not operating
- The direction of spray ports can be turned around 360° to facilitate the installment
- When not operating, it drains automatically
- Effect on vegetables: 
Fine mist moistens even underside of a leaf, maintaining ideal moisture
Moistening also affects wrapped product
- Customer reactions: "Visual effect of the product's fresh appearance."
 

[APPLICATIONS]
- For placing on the top of open showcases:
FT-420S/FT-420SC…6' wide case
FT-520S/FT-520SC…8' wide case

 
 
 
Humidifying Solutions > UCAN > Ultrasonic Humidifiers > For Refrigerant Storage
 
For Refrigerant Storage
 
FT-F Series
 
[PRODUCT OUTLINE]
An immersion-type UV lamp is mounted inside the water tank of a humidifier. Used for humidification of fruits and vegetables storage in a wide range of sizes from small to large refrigerated chambers. Many additional industrial applications have been found for this series of universal-type humidifiers including but not limited refrigerated storages , mushroom culture and so on. The bracket for drainage solenoid valve is standard installation. The units in this series can be hung from the ceiling or can be mounted on the wall by use of dedicated brackets. There are eight types to choose from by humidification output. Either ON/OFF control or proportional control is possible. Humidity outputs are from 1 to 12 liter/hour. Humidity regulation changes depending on each objects. Please contact us about humidity regulation.
 
[FEATURES]
- When mist evaporates, it lowers the surrounding air temperature, allowing energy-saving humidification in a refrigerated storage
- Optional equipments are available: anti-icing system, tolerant specification for reeking.
- The humidifier contains a powerful drip-proof air blower with high air volume
- The main unit benefits from a fully stainless steel construction (SUS-304) that prevents rust
 
[APPLICATIONS]
- Refrigerated storages of fruits and vegetables
- Artificial cultures of various kinds of mushrooms
- Plant germination rooms, plant nurseries, orchid cultures
- Food processing clean rooms and storages
- Storage of cigars and wine cellars, etc
 
 
 
Humidifying Solutions > UCAN > Ultrasonic Humidifiers > For Low Oxygen Storage
 
For Low Oxygen Storage
 
FT-42DHUV-ULO (Ultrasonic Humidifier for CA Storage)
 
[PRODUCT OUTLINE]
An immersion-type UV lamp is mounted inside the water tank of a humidifier.
Recently we have newly developed & produced the special humidifiers FT-42DHUV-ULO to be used for ultra low oxygen(ULO) storage or Controlled Atmosphere storage to keep the apples or pears fresh for a long time(about 200 days) with the condition of low concentration of oxygen and high concentration of carbon dioxide gas at low temperature (about 0 ¡æ) in the storage. We have done the test at the site in Europe for apples, and the result was extremely good and received good reputations. Humidity output is 2.0 liter/hour.
 

[FEATURES]
- Unit is air tightened for not mixing up the external air with air in the storage through humidifier units
- Designed the unit with insulation prevention to avoid condensation due to the temperature difference between inside and outside the storage
- The unit is installed outside of storage so that maintenance job can be carried out without switch off the refrigerator and low temperature(above £­2¡æ), high humidity can be applied
- When not operating, it drains automatically which stop bacteria from growing
 

[APPLICATIONS]
- CA storages for such as apples, oranges, pears and grapes
- CA storages for grains such as potatoes, rice
- Various chilling temperature storages
 
 
 
Humidifying Solutions > UCAN > Ultrasonic Humidifiers > For Integrated Into Air-Cond System
 
For Integrated Into Air-Cond System
 
FT-P Series
 
[PRODUCT OUTLINE]
An immersion-type UV lamp is mounted inside the water tank of a humidifier.
To be built into air-conditioning units or in ducts. Highly efficient and energy saving as it turns a large volume water into fine mist, consuming little electricity. The mist then quickly evaporates and is absorbed into the air. The series has 12 models of varying humidification capacity and it can be controlled either by On/Off switch or by proportional control system. Humidity outputs are from 1 to 30 litres/hour. 
 
[FEATURES]
- Low running cost
- Quick response with humidification
- High safety factor as this series uses no heating for humidification
- When not operating, it drains automatically
 
[APPLICATIONS]
- Incorporation into packaged air-conditionings or air-handling units
 
 
 
Humidifying Solutions > UCAN > Ultrasonic Humidifiers > For Building Into Equipment
 
For Building Into Equipment
 
FT-P Series
 

[PRODUCT OUTLINE]
An immersion-type UV lamp is mounted inside the water tank of a humidifier.
A compact-sized ultrasonic humidifier that has been designed for easy installation into all sorts of equipment anywhere that require humidity control such as in a pre-fabricated cold storage chamber from 10? to 30?. With use of various kinds of brackets (optional) designed to facilitate the installation, this humidifier model can be installed either inside the host equipment or outside.

In the latter case, the interior is humidified through nozzles. Housing is made of stainless steel.

The FT-N’s has a mechanism to drain externally any condensation that may accumulate around the fan as it sucks in misty air that contains water droplets. This precludes any effect on the electrical part. It can be controlled either by On/Off switch or by proportional control system. Humidity outputs are 0.5 to 1.5 litres/hour.
 
[FEATURES]
- Equipped with draining system making this model optimum for use through a partition in high humidity
- When not operating, it drains automatically
- Sturdily built and free of corrosion, being completely made of stainless steel
- Many option parts are available. For example, air filter, mounting brackets, drain pan and nozzle brackets
- Use of a duct hose to pinpoint the direction of spraying of mist toward where it is required
 
[APPLICATIONS]
- Refrigerated storages of fruits and vegetables
- Wine cellars
- Refrigerated storages of grains
- Food processing machineries such as fermentation of bread doughss
- Mushroom cultures
- Storages of cut flowers
- Display cases for fruits, vegetables, fresh fishes and meats
- Small-sized air-conditioning units
- Environmental testing equipments
 
 
 
Humidifying Solutions > UCAN > Ultrasonic Humidifiers > Mobile-type Steam Humidifier
 
Mobile-type Steam Humidifier
 
Humidas
 
[PRODUCT OUTLINE]
HUMIDAS is a mobile, full-fledged steam humidifier for use in offices and other commercial spaces without the need for any electrical and pipelaying work. It contains long-lasting PTC immersion heaters that cause no fear of fire breaking out. For use in offices, it comes complete with the right level of steam output, digital indicators of humidity level and control functions with use of a precision humidistat. As it comes mounted with a large 13 liter water supply, one time filling gives 10 hours' continuous humidification. The only maintenance required is to drain completely for the off-season. A drainage tap is provided at the bottom of the unit. Available in two of two-tone color combinations to choose from: Ivory/Gray and Gray/Ivory. Steam output is 1.2kg/hour.
 
[FEATURES]
- Only needs to be plugged in
- Powerful 1100W humidification
- Equipped with large 13 liter water tank, no plumbing needed
- Equipped with casters allowing easy movement
- Function to set and keep humidity at desired level
- Digital display showing the current humidity level
- Equipped with safe and long-lasting PTC water heaters
- The only maintenance required is to drain completely for the off-season
 
[APPLICATIONS]
- Offices, meeting rooms, show rooms, lounges, computer rooms, private homes
- Libraries, museums, exhibition halls, art galleries, broadcasting stations
- Photo studios, printing shops, training gyms, nurseries
- Electronics manufacturing facilities, medical facilities (examination rooms, hospital wards, nurses' stations etc.)
- Laboratories, barber and beauty shops, school class rooms - Various kinds of public facilities